MODEL TRX-16
The WRAP-IT-HEAT® Model TRX-16 Drum Heater, is a thermostatically controlled drum heater with
a three heat switch. Model TRX-16 is for standard 16 gallon all METAL drums. TRX-16 cannot be
used on Plastic, Plastic Lined or Fiber Drums.
EXPO ENGINEERED Model TRX-16 is designed for heating materials with GOOD HEAT
RECEPTIVITY. Thermostat bulb senses temperature in an area remote from the active heating
element. You have the choice of two thermostat ranges: High, 200°F - 400°F, and Low, 60°F -
250°F. Standard units come in 120 volts rating. Three heat switch allows three wattage ratings per
thermostat setting and voltage rating: HIGH = Maximum Watts; MEDIUM = 1/2 Maximum Watts and
LOW = 1/4 Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot power
cord and standard three wire plug for grounded operation. FOR INDOOR USE ONLY.
TRX-16 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT Model TRX-16 Drum Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter ........................................................................14-1/2"
Shipping weight ..............................................10 lbs. (Approx.)
Operating Voltage................................120V AC Single Phase
Power Output...................................................1,500W @ 120V
Thermostat Range.................60°F to 250°F or 200°F to 400°F
Amperage ..........................................................12.5 A at 120 V
Plug.....................................6' Cord with NEMA 5-15 plug
The WRAP-IT-HEAT® Model TRX-16 Drum Heater, is a thermostatically controlled drum heater with
a three heat switch. Model TRX-16 is for standard 16 gallon all METAL drums. TRX-16 cannot be
used on Plastic, Plastic Lined or Fiber Drums.
EXPO ENGINEERED Model TRX-16 is designed for heating materials with GOOD HEAT
RECEPTIVITY. Thermostat bulb senses temperature in an area remote from the active heating
element. You have the choice of two thermostat ranges: High, 200°F - 400°F, and Low, 60°F -
250°F. Standard units come in 120 volts rating. Three heat switch allows three wattage ratings per
thermostat setting and voltage rating: HIGH = Maximum Watts; MEDIUM = 1/2 Maximum Watts and
LOW = 1/4 Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot power
cord and standard three wire plug for grounded operation. FOR INDOOR USE ONLY.
TRX-16 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT Model TRX-16 Drum Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter ........................................................................14-1/2"
Shipping weight ..............................................10 lbs. (Approx.)
Operating Voltage................................120V AC Single Phase
Power Output...................................................1,500W @ 120V
Thermostat Range.................60°F to 250°F or 200°F to 400°F
Amperage ..........................................................12.5 A at 120 V
Plug.....................................6' Cord with NEMA 5-15 plug
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Increase flow rate of viscous materials with a safe, efficient Electric Drum Heater.
TRX-55 SERIES
The WRAP-IT-HEAT® Model TRX-55 Drum Heater, is a thermostatically controlled drum
heater with a three heat switch. Model TRX-55 Drum Heater is for standard 55 gallon all
METAL drums. TRX-55 cannot be used on Plastic, Plastic Lined or Fiber Drums.
EXPO ENGINEERED Model TRX-55 is designed for heating materials with GOOD HEAT
RECEPTIVITY. Thermostat bulb senses temperature in an area remote from the active heating
element. You have the choice of two thermostat ranges: High, 200°F - 400°F, and Low, 60°F
- 250°F. 120V and 240V rating available. Three heat switch allows three wattage ratings per
thermostat setting and voltage rating: HIGH = Maximum Watts; MEDIUM = 1/2" Maximum Watts
and LOW = 1/4" Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot
power cord and high ampere three pin plug. For 120V operation, use NEMA 5-20 Outlet. For
240V operation, use NEMA 6-15 Outlet. FOR INDOOR USE ONLY.
TRX-55 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT® Model TRX-55 Drum Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter .............................................................................22-1/2"
Shipping weight ....................................................14 lbs. (Approx.)
Operating Voltage..................120V AC or 240V AC Single Phase
Power Output.......................1,920W @ 120V or 3,000W @ 240V
Thermostat Range......................60°F to 250°F or 200°F to 400°F
Amperage ................................16 A at 120 V & 12.5 @ 240 V Plug.....................................6'
Cord with NEMA 5-20 plug
TRX-55 SERIES
The WRAP-IT-HEAT® Model TRX-55 Drum Heater, is a thermostatically controlled drum
heater with a three heat switch. Model TRX-55 Drum Heater is for standard 55 gallon all
METAL drums. TRX-55 cannot be used on Plastic, Plastic Lined or Fiber Drums.
EXPO ENGINEERED Model TRX-55 is designed for heating materials with GOOD HEAT
RECEPTIVITY. Thermostat bulb senses temperature in an area remote from the active heating
element. You have the choice of two thermostat ranges: High, 200°F - 400°F, and Low, 60°F
- 250°F. 120V and 240V rating available. Three heat switch allows three wattage ratings per
thermostat setting and voltage rating: HIGH = Maximum Watts; MEDIUM = 1/2" Maximum Watts
and LOW = 1/4" Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot
power cord and high ampere three pin plug. For 120V operation, use NEMA 5-20 Outlet. For
240V operation, use NEMA 6-15 Outlet. FOR INDOOR USE ONLY.
TRX-55 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT® Model TRX-55 Drum Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter .............................................................................22-1/2"
Shipping weight ....................................................14 lbs. (Approx.)
Operating Voltage..................120V AC or 240V AC Single Phase
Power Output.......................1,920W @ 120V or 3,000W @ 240V
Thermostat Range......................60°F to 250°F or 200°F to 400°F
Amperage ................................16 A at 120 V & 12.5 @ 240 V Plug.....................................6'
Cord with NEMA 5-20 plug
WRAP-IT-HEAT
TM
1824 SOUTH CICERO AVE.
CICERO, IL 60804
sales@expoengineered.com
Ph. 708-780-7155
FAX 708-780-7125
CICERO, IL 60804
sales@expoengineered.com
Ph. 708-780-7155
FAX 708-780-7125
DRUM HEATERS FOR THE METAL
AND PLASTIC DRUM USER
AND PLASTIC DRUM USER
Product Guide
DRUM HEATERS
FOR METAL
DRUMS AND
PAILS
FOR METAL
DRUMS AND
PAILS
DRUM HEATERS
FOR PLASTIC
DRUMS AND
PAILS
FOR PLASTIC
DRUMS AND
PAILS
MODEL TRX-30
The WRAP-IT-HEAT® Model TRX-30 Drum Heater, is a thermostatically controlled drum
heater with a three heat switch. Model TRX-30 Drum Heaters for standard 30 gallon all
METAL drums. TRX-30 cannot be used on Plastic, Plastic Lined or Fiber Drums.
EXPO ENGINEERED Model TRX-30 is designed for heating materials with GOOD HEAT
RECEPTIVITY. Thermostat bulb senses temperature in an area remote from the active
heating element. You have the choice of two thermostat ranges: High, 200°F - 400°F, and
Low, 60°F - 250°F. Standard units come in a 120 volt rating. Three heat switch allows three
wattage ratings per thermostat setting and voltage rating: HIGH = Maximum Watts; MEDIUM
= 1/2 Maximum Watts and LOW = 1/4 Maximum Watts. Equipped with spring loaded toggle
clamp for snug fit, 6 foot power cord and high ampere three pin plug. For 120V operation,
use NEMA 5-20 Outlet . FOR INDOOR USE ONLY.
TRX-30 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT® Model TRX-30 Drum Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter .........................................................................18-1/2"
Shipping weight ................................................12 lbs. (Approx.)
Operating Voltage..................................120V AC Single Phase
Power Output....................................................1,920W @ 120V
Thermostat Range..................60°F to 250°F or 200°F to
400°F
Amperage ..............................................................16 A at 120 V
Plug.....................................6' Cord with NEMA 5-20 plug
MODEL TRX-5
The WRAP-IT-HEAT® Model TRX-5 Pail Heater, is a thermostatically controlled drum heater with
a three heat switch. Model TRX-5 is for standard 5 gallon all METAL pails. TRX-5 cannot be
used on Plastic, Plastic Lined or Fiber Pails.
EXPO ENGINEERED TRX-5 is designed for heating materials with GOOD HEAT RECEPTIVITY.
Thermostat bulb senses temperature in an area remote from the active heating element. You
have the choice of two thermostat ranges: High, 200°F - 400°F, and Low, 60°F - 250°F.
Standard units come in a 120 volt rating. Three heat switch allows three wattage ratings per
thermostat setting and voltage rating: HIGH = Maximum Watts; MEDIUM = 1/2 Maximum Watts
and LOW = 1/4 Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot
power cord and standard three wire plug for grounded operation. FOR INDOOR USE ONLY.
TRX-5 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT Model TRX-5 Pail Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter ................................................................11-1/4"
Shipping weight .........................................7 lbs. (Approx.)
Operating Voltage.........................120V AC Single Phase
Power Output............................................1,500W @ 120V
Thermostat Range...........60°F to 250°F or 200°F to
400°F
Amperage ...................................................12.5 A at 120 V
Plug.....................................6' Cord with NEMA 5-15 plug
Note: If you require a CUSTOM designed Drum Heater for a special application, please consult
your distributor or the manufacturer.
The WRAP-IT-HEAT® Model TRX-5 Pail Heater, is a thermostatically controlled drum heater with
a three heat switch. Model TRX-5 is for standard 5 gallon all METAL pails. TRX-5 cannot be
used on Plastic, Plastic Lined or Fiber Pails.
EXPO ENGINEERED TRX-5 is designed for heating materials with GOOD HEAT RECEPTIVITY.
Thermostat bulb senses temperature in an area remote from the active heating element. You
have the choice of two thermostat ranges: High, 200°F - 400°F, and Low, 60°F - 250°F.
Standard units come in a 120 volt rating. Three heat switch allows three wattage ratings per
thermostat setting and voltage rating: HIGH = Maximum Watts; MEDIUM = 1/2 Maximum Watts
and LOW = 1/4 Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot
power cord and standard three wire plug for grounded operation. FOR INDOOR USE ONLY.
TRX-5 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT Model TRX-5 Pail Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter ................................................................11-1/4"
Shipping weight .........................................7 lbs. (Approx.)
Operating Voltage.........................120V AC Single Phase
Power Output............................................1,500W @ 120V
Thermostat Range...........60°F to 250°F or 200°F to
400°F
Amperage ...................................................12.5 A at 120 V
Plug.....................................6' Cord with NEMA 5-15 plug
Note: If you require a CUSTOM designed Drum Heater for a special application, please consult
your distributor or the manufacturer.
120 Volt = NEMA 5-20
NEMA 5-20
NEMA 5-15
NEMA 5-15
©2018 Expo Engineered Inc. All Rights Reserved.
ACCESSORIES FOR
DRUM AND PAIL
HEATERS
DRUM AND PAIL
HEATERS
240 Volt = NEMA 5-20