WRAP-IT-HEAT
TM
1824 SOUTH CICERO AVE.
CICERO, IL 60804
sales@expoengineered.com
Ph. 708-780-7155
FAX 708-780-7125
CICERO, IL 60804
sales@expoengineered.com
Ph. 708-780-7155
FAX 708-780-7125
DRUM HEATERS FOR THE METAL
AND PLASTIC DRUM USER
AND PLASTIC DRUM USER
Electric Drum Heater Thermostat Control with Three Heat Switch
Increase flow rate of hard to mix materials with a safe, efficient Electric Drum Heater.
MODEL AGM-55
The WRAP-IT-HEAT® Model AGM-55 Drum Heater, is a thermostatically controlled drum
heater with a three heat switch. Model AGM-55 Drum Heater is designed for heating hard to
mix materials with GOOD HEAT RECEPTIVITY, such as tallow, lard and similar materials. Model
AGM-55 is to be used on METAL drums only. AGM-55 cannot be used on Plastic, Plastic Lined
or Fiber Drums.
Thermostat bulb senses temperature in an area remote from the active heating element. You
have the choice of two thermostat ranges: High, 200°F - 400°F, and Low, 60°F - 250°F. 120V
rating available. A three heat switch allows three wattage ratings per thermostat setting and
voltage rating: HIGH = Maximum Watts; MEDIUM = 1/2" Maximum Watts and LOW = 1/4"
Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot power cord and
standard three wire plug for grounded operation. FOR INDOOR USE ONLY.
AGM-55 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT Model AGM-55 Drum Heater is U.L. Listed and C.S.A. Certified.
MODEL AGM-55 SPECIFICATIONS
Diameter .................................................................................22-1/2"
Shipping weight ........................................................14 lbs. (Approx.)
Operating Voltage................................................................120V AC
Output.................................120 Volts AC/1750 Watts (5,985 Btu/Hr)
Thermostat Range..........................60°F to 250°F or 200°F to 400°F
Amperage ..................................................14.6 Amperes at 120 Volts
Increase flow rate of hard to mix materials with a safe, efficient Electric Drum Heater.
MODEL AGM-55
The WRAP-IT-HEAT® Model AGM-55 Drum Heater, is a thermostatically controlled drum
heater with a three heat switch. Model AGM-55 Drum Heater is designed for heating hard to
mix materials with GOOD HEAT RECEPTIVITY, such as tallow, lard and similar materials. Model
AGM-55 is to be used on METAL drums only. AGM-55 cannot be used on Plastic, Plastic Lined
or Fiber Drums.
Thermostat bulb senses temperature in an area remote from the active heating element. You
have the choice of two thermostat ranges: High, 200°F - 400°F, and Low, 60°F - 250°F. 120V
rating available. A three heat switch allows three wattage ratings per thermostat setting and
voltage rating: HIGH = Maximum Watts; MEDIUM = 1/2" Maximum Watts and LOW = 1/4"
Maximum Watts. Equipped with spring loaded toggle clamp for snug fit, 6 foot power cord and
standard three wire plug for grounded operation. FOR INDOOR USE ONLY.
AGM-55 is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT Model AGM-55 Drum Heater is U.L. Listed and C.S.A. Certified.
MODEL AGM-55 SPECIFICATIONS
Diameter .................................................................................22-1/2"
Shipping weight ........................................................14 lbs. (Approx.)
Operating Voltage................................................................120V AC
Output.................................120 Volts AC/1750 Watts (5,985 Btu/Hr)
Thermostat Range..........................60°F to 250°F or 200°F to 400°F
Amperage ..................................................14.6 Amperes at 120 Volts
NEMA 5-15
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
©2018 Expo Engineered Inc. All Rights Reserved.
Product Guide
DRUM HEATERS
FOR METAL
DRUMS AND
PAILS
FOR METAL
DRUMS AND
PAILS
DRUM HEATERS
FOR PLASTIC
DRUMS AND
PAILS
FOR PLASTIC
DRUMS AND
PAILS
ACCESSORIES FOR
DRUM AND PAIL
HEATERS
DRUM AND PAIL
HEATERS