| ||||||||||||||||||||||||||||||||||||||||||||
WRAP-IT-HEAT
TM
1824 SOUTH CICERO AVE.
CICERO, IL 60804
sales@expoengineered.com
Ph. 708-780-7155
FAX 708-780-7125
CICERO, IL 60804
sales@expoengineered.com
Ph. 708-780-7155
FAX 708-780-7125
DRUM HEATERS FOR THE METAL
AND PLASTIC DRUM USER
AND PLASTIC DRUM USER
Increase flow rate of viscous heat sensitive materials with a safe, efficient Electric Drum Heater.
MODEL LIM-55 E/W
The WRAP-IT-HEAT® Model LIM-55 E/W Drum Heater, is specifically designed to assist the flow
of viscous materials contained in a High Density Polyethylene plastic drum. Model LIM-55 E/W is
for standard 55 gallon drums with a diameter 22-1/2".
EXPO ENGINEERED Model LIM-55 E/W 9-1/4” Wide Drum Heater for plastic drums is a 120 volts
AC heater rugged aluminum steel construction. The heat delivered to the drum does not exceed
165°F as recommended by plastic drum manufacturers. This is accomplished with a pre-set bi
metal thermostat mounted directly on the heating band. LIM-55 E/W is activated with an easily
accessible on/off switch.
Model LIM-55 E/W is equipped with a spring loaded toggle clamp for snug fit, on/off indicator light,
6 foot power cord and 3 wire plug for grounded operation. FOR INDOOR USE ONLY.
LIM-55 E/W is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT Model LIM-55 E/W Drum Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter............................................................................22-1/2"
Width....................................................................................9-1/4"
Shipping weight.................................................14 lbs. (Approx.)
Operating Voltage..........................................................120V AC
Ampere Draw.............................6.67 Amperes at 120 Volts AC
Power Output..................800 Watts at 120 Volts AC 50/60 Hz.
MODEL LIM-55 E/W
The WRAP-IT-HEAT® Model LIM-55 E/W Drum Heater, is specifically designed to assist the flow
of viscous materials contained in a High Density Polyethylene plastic drum. Model LIM-55 E/W is
for standard 55 gallon drums with a diameter 22-1/2".
EXPO ENGINEERED Model LIM-55 E/W 9-1/4” Wide Drum Heater for plastic drums is a 120 volts
AC heater rugged aluminum steel construction. The heat delivered to the drum does not exceed
165°F as recommended by plastic drum manufacturers. This is accomplished with a pre-set bi
metal thermostat mounted directly on the heating band. LIM-55 E/W is activated with an easily
accessible on/off switch.
Model LIM-55 E/W is equipped with a spring loaded toggle clamp for snug fit, on/off indicator light,
6 foot power cord and 3 wire plug for grounded operation. FOR INDOOR USE ONLY.
LIM-55 E/W is to be used to heat NON-FLAMMABLE, NON-COMBUSTIBLE materials only in a
NON-HAZARDOUS area.
The WRAP-IT-HEAT Model LIM-55 E/W Drum Heater is U.L. Listed and C.S.A. Certified.
SPECIFICATIONS
Diameter............................................................................22-1/2"
Width....................................................................................9-1/4"
Shipping weight.................................................14 lbs. (Approx.)
Operating Voltage..........................................................120V AC
Ampere Draw.............................6.67 Amperes at 120 Volts AC
Power Output..................800 Watts at 120 Volts AC 50/60 Hz.
NEMA 5-15
©2018 Expo Engineered Inc. All Rights Reserved.
Product Guide
DRUM HEATERS
FOR METAL
DRUMS AND
PAILS
FOR METAL
DRUMS AND
PAILS
DRUM HEATERS
FOR PLASTIC
DRUMS AND
PAILS
FOR PLASTIC
DRUMS AND
PAILS
ACCESSORIES FOR
DRUM AND PAIL
HEATERS
DRUM AND PAIL
HEATERS