| ||||||||||||||||||||||||||||||||
WRAP-IT-HEAT
TM
1824 SOUTH CICERO AVE.
CICERO, IL 60804
sales@expoengineered.com
Ph. 708-780-7155
FAX 708-780-7125
CICERO, IL 60804
sales@expoengineered.com
Ph. 708-780-7155
FAX 708-780-7125
DRUM HEATERS FOR THE METAL
AND PLASTIC DRUM USER
AND PLASTIC DRUM USER
©2018 Expo Engineered Inc. All Rights Reserved.
Model ETC-111 (Electronic Temperature Control)
ETC Controller offers a full-featured electronic option to your stock Drum/Pail Heaters
The ETC is designed to provide application flexibility to control precise liquid temperatures in
your drum/pails.
ETC temperature control is designed to provide On/Off control for your material heating
applications.
Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you
need to program it. The standard digital display and keypad allow the user to adjust the
temperature settings with 1° resolution. Set point temperature and differentials can all be
selected using the keypad and display. When not in the programming mode, the display gives
a constant readout of the sensor temperature. Annunciators on the liquid crystal display also
indicate when the relay is energized. The ETC also has a keypad lockout switch to prevent
tampering with the control settings by unauthorized personnel.
Features:
• Fully wired digital thermostat
• 6’ power cord
• Wide temperature range (-30°F to 220°F)
• Wide differential adjustment (1°F to 30°F)
• LCD read-out for sensor temperature, control settings and relay status
• High amp output relay (FLA 16 amps @ 120V and 8 amps @ 208/240V AC) single stage
• EEPROM memory retains control settings during power outages
• Keypad lockout to prevent end-user alteration of settings
• Expendable 8 feet lead with sensor
• Easy 4-step set-up
• Selectable °F or °C heating modes
• NEMA 1 case and cover
ETC Controller offers a full-featured electronic option to your stock Drum/Pail Heaters
The ETC is designed to provide application flexibility to control precise liquid temperatures in
your drum/pails.
ETC temperature control is designed to provide On/Off control for your material heating
applications.
Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you
need to program it. The standard digital display and keypad allow the user to adjust the
temperature settings with 1° resolution. Set point temperature and differentials can all be
selected using the keypad and display. When not in the programming mode, the display gives
a constant readout of the sensor temperature. Annunciators on the liquid crystal display also
indicate when the relay is energized. The ETC also has a keypad lockout switch to prevent
tampering with the control settings by unauthorized personnel.
Features:
• Fully wired digital thermostat
• 6’ power cord
• Wide temperature range (-30°F to 220°F)
• Wide differential adjustment (1°F to 30°F)
• LCD read-out for sensor temperature, control settings and relay status
• High amp output relay (FLA 16 amps @ 120V and 8 amps @ 208/240V AC) single stage
• EEPROM memory retains control settings during power outages
• Keypad lockout to prevent end-user alteration of settings
• Expendable 8 feet lead with sensor
• Easy 4-step set-up
• Selectable °F or °C heating modes
• NEMA 1 case and cover
Product Guide
DRUM HEATERS
FOR METAL
DRUMS AND
PAILS
FOR METAL
DRUMS AND
PAILS
DRUM HEATERS
FOR PLASTIC
DRUMS AND
PAILS
FOR PLASTIC
DRUMS AND
PAILS
ACCESSORIES FOR
DRUM AND PAIL
HEATERS
DRUM AND PAIL
HEATERS